Several common failures of toffee packing machine china
1. The knife seat of toffee packing machine china is too high or too low, the packaging speed is too fast, and when the push rod and the cutter are not synchronized, the cutter will cut on the product. The maintenance method is to reduce the packaging speed and adjust the height of the end sealing parts so that The center of the sealing knife is in the middle of the product height.
2. The color of the film color mark is too light, the film drive slips, and the cutting position deviates from the color mark when the color mark tracking is not turned on. At this time, the maintenance method is to refer to the packaging machine manual and adjust its sensitivity; in the man-machine dialogue interface, Switch the tracking mode to "Track Cut".
3. If the temperature of the toffee packing machine china is too high, the speed is too slow, and the outer layer of the envelope has poor heat resistance, scorched and wrinkled marks will appear on the seal. The repair method is to increase the speed, lower the temperature, and replace the film material.
4. The solid-state breaker is burnt out, the temperature control meter is damaged, and the thermometer cannot control the temperature when the thermocouple is damaged. The maintenance method is to replace the electric couple, the temperature control meter, and the heating element.