Common faults of china toffee packing machine
1. The knife seat of china toffee packing machine is too high or too low, the packing speed is too fast, and when the push rod and the cutter are not synchronized, the cutter will cut on the product. The center of the sealing knife is in the middle of the product height.
2. The color of the film color mark is too light, the film drive slips, and the cutting position deviates from the color mark when the color mark tracking is not turned on. At this time, the maintenance method is to refer to the packaging machine manual and adjust its sensitivity; in the man-machine dialogue interface, Switch the tracking mode to "Track Cut".
3. If the temperature is too high, the speed is too slow, and the outer layer of the film has poor heat resistance, scorching marks will appear on the seal. The maintenance method is to increase the speed, lower the temperature, and replace the film material.
4. The solid-state breaker is burned out, the temperature control meter is damaged, and the thermometer cannot control the temperature when the thermocouple is damaged. The maintenance method is to replace the electric couple, the temperature control meter, and the heating element.
5. The air pressure of China toffee packing machine is wrong, the cylinder swing rod is loose, the heating temperature is low, and when the hot pressing roller is not parallel to the transmission roller, there will be poor heat sealing. The maintenance method is to adjust the parallelism, adjust the temperature and air pressure to make it tight.